Charlynn Hydraulic Motors

Low speed, high torque hydraulic mtoros. Smooth running over the entire speed range. High starting torque and high efficiency. Long life under extreme operating conditions. Sturdy and compact design. High radial and axial bearing capacity.
For applications in both open and closed loop hydraulic systems. Suitable for a wide variety of hydraulic fluid.

Charlynn 101-1753-009

Only

11.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 2.2
RPM - 959@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH36

Charylnn 101-1001-009

Only

12.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 2.8
RPM - 914@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH50

Charlynn 101-1002-009

Only

12.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 4.5
RPM - 725@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH80

Charylnn 101-1003-009

Only

12.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 5.9
RPM - 559@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH100

Charlynn 101-1005-009

Only

13.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 11.3
RPM - 294@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH200

Charylnn 101-1008-009

Only

14.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 22.6
RPM - 147@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DH400

Charylnn 103-1006-012

Only

18.00lbs

Port Size - 1/2" NPTF
Cu. in. Disp. - 14.1
RPM - 232@12GPM
Max GPM - 16
Mounting - 4-bolt face
Interchangeable with Danfoss DS250

Hydraulic Motor Plate

Only

Hydraulic Super Sale!

Larger picture

4.00lbs

Sale! was $25.00

5"H x 4"W x 1/4" thick.
Bolt Holes - 2-3/8" center to center.
Used to mount most standard 4-bolt face hydraulic motors such as Charlynn, Danfoss, and White Hydraulics.

1" to 1" Coupler

Only

Larger picture

1.00lbs

Dimensions:
Length - 3"
Diameter - 2"
Keyway - 1/4" with two set screws
Will fit 1" shaft size like found on the Charlynn Hydraulic Motors.